All DP wheels must have the car number stamped in the rim center section prior to having a tire mounted

Guideline for correct use of Pirelli Grand-Am DP tires:

• To optimize the performance of Pirelli Daytona Prototype slick tires it is strongly recommended to NEVER set cold pressures lower than 20 psi and to NEVER set hot pressure lower than 30psi.
• Maximum Hot Temperature should be around 220F.
• Optimum working temperature spread is about 50F between inner and outer shoulders.
• Maximum Camber permitted is 3.5°

Description	Tread	Position	Minimum Cold PSI	Minimum Hot PSI
325/650-18	Slick	FRT	20	30
325/705-18	Slick	RR	20	30
325/650-18	Rain	FRT	25	32
325/705-18	Rain	RR	25	32

Guideline for correct use of Pirelli Grand-Am GT tires on a REAR Engine car:

• To better optimize the performance of Pirelli GT slick tires fitted on a rear engine car, it is strongly recommended to NEVER set cold pressures lower than 28psi front and 30psi rear and to NEVER set hot pressure lower than 38psi front & 40psi rear.
• Maximum Hot Temperature should be around 220F.
• Optimum working temperature spread is about 50F between inner and outer shoulders.
• Maximum Camber permitted is Front 3.5°; Rear 3°

Tread	Position	Minimum Cold PSI	Minimum Hot PSI
Slick	FRT	28	38
Slick	RR	30	40
Rain	FRT	30	40
Rain	RR	32	42

Guideline for correct use of Pirelli Grand-Am GT tires on a FRONT Engine car:

• To optimize the performance of Pirelli GT slick tires fitted on a front engine car, it is strongly recommended to NEVER set cold pressures lower than 30psi front and 28psi rear and to NEVER set hot pressure lower than 40psi front & 38psi rear.
• Maximum Hot Temperature should be around 220F.
• Optimum working temperature spread is about 50F between inner and outer shoulders.
• Maximum Camber admitted is Front 3.5°; Rear 3°

Tread	Position	Minimum Cold PSI	Minimum Hot PSI
Slick	FRT	30	40
Slick	RR	28	38
Rain	FRT	32	42
Rain	RR	30	40

Description	Treat	Position
245/645-18	Slick	FRT
285/645-18	Slick	FRT
245/645-18	Rain	FRT
285/645-18	Rain	FRT
305/660-18	Slick	FRT/RR
305/660-18	Rain	FRT/RR
305/675-18	Slick	RR
305/675-18	Rain	RR
305/685-18	Slick	RR
305/690-18	Rain	RR

General recommendation

• Pirelli strongly recommend the use of metal valves;
• Pirelli strongly recommend the use of valve caps even for short runs;
• Pirelli welcomes the use of any kind of pressure monitoring system. A preliminary fitting test should be carried out in cooperation with Pirelli Tire Technicians;
• All rims must have, if any, pressure sensors fitted by the Team prior to having any tire mounted.

STRICT COMPLIANCE WITH PIRELLI RECOMMENDATIONS WILL GIVE ALL TEAMS THE POSSIBILITY TO OPTIMIZE THE USE OF OUR TIRES.